Welded wire mesh must be produced in accordance with the design drawings during the production process, but we often find that the same welded wire mesh is not the same in different buyers or manufacturers. These data include welded meshes. The required wire size and the size of the welded wire mesh and the size of the outer mesh of the welded wire mesh are illustrated by examples, 4.0mm/5.0mm, 50mm*100mm, 2000mm*3500mm, dark green plastic coated mesh. The above data must be provided before production. I just mentioned that many suppliers or purchasers have different interpretations of the above data. For example, some people may say that the wire length is 4.0 mm, and some will say that The wire diameter is 5.0mm. Is that correct? Where does the mesh hole 50mm and 100mm mean? 2000mm * 3500mm for the fence mesh that data refers to the width of the mesh, which data refers to the high mesh it?
First, the significance of 4.0mm/5.0mm for silk is 4.0mm before coating, and 5.0mm after coating. The welded wire mesh mesh size is often referred to as the inner edge to the inner edge of the wire. The distances and meshes are often pitches where the pitch above and below is greater than the right and left. 2000 mm usually refers to the height, 3500 mm usually refers to the width. After we know this, we should understand the sizes of the welded wire mesh.
For more information, our company will give you the most professional answer.